73-5 — District Standards
R-1, Single-Family Residential-1
The R-1 district is intended for low density single-family detached housing and residentially compatible uses on larger lots and substantial pervious areas.
3. Maximum Building Height: 35 ft. 4. Maximum Impervious Surface: 40% 5. Street Setback (arterial): 30 ft. 6. Street Setback (other): 20 ft. 7. Interior Setback: 15 ft. 8. Rear Setback: 40 ft.
R-2, Single-Family Residential-2
The R-2 district is intended for medium density single- family detached housing and residentially compatible uses on mid-sized lots and substantial amounts of pervious surfaces.
R-3, Single-Family Residential-3
The R-3 district is intended for medium density single- family detached housing and residentially compatible uses requiring large amounts of pervious surfaces.
3. Maximum Building Height: 35 ft. 4. Maximum Impervious Surface: 45% 5. Street Setback (arterial): 25 ft. 6. Street Setback (other): 20 ft. 7. Interior Side Setback (minor): 10 ft. 8. Rear Setback: 20 ft.
R-5, Mixed Single Family Residential-5
The R-5 district is intended to provide suitable areas for single family attached and detached housing at medium densities. These districts may also serve as transitional zones between light commercial/office uses and areas reserved for lower density single family uses.
RM-6, Multi-Family Residential (6 units/acre)
The RM-6 district is intended to provide suitable areas for multi-family housing designed in a compatible and complementary manner so as to function as a singular and integrated land use. This zoning district may serve as a transitional zone between commercial/office uses and residential districts of a lesser intensity.
4. Minimum Tract Frontage: 100 ft. 5. Maximum Building Height: 45 ft. 6. Maximum Impervious Surface: 55% 7. Street Setback (arterial): 50 ft. 8. Street Setback (other): 40 ft. 9. Interior Setback: 25 ft.
RM-8, Multi-Family Residential (8 units/acre)
The RM-8 district is intended to provide suitable areas for multi-family housing designed in a compatible and complementary manner so as to function as a singular and integrated land use. This zoning district may serve as a transitional zone between commercial/office uses and residential districts of a lesser intensity.
4. Minimum Tract Width: 100 ft. 5. Maximum Building Height: 45 ft. 6. Maximum Impervious Surface: 60% 7. Street Setback (arterial): 50 ft. 8. Street Setback (other): 40 ft. 9. Interior Setback: 25 ft
C-1, Neighborhood Retail Commercial
The C-1 district is intended to provide suitable areas for limited retail and personal services serving those neighborhoods in the immediate area. Uses located within this district supply those goods and services characterized by convenience retail and personal services such as small grocery stores, hair salons, and dry cleaners. The scope at which properties are developed within the C-1 district should reflect their relatively small market areas. This zoning district may serve as a step down from more intense commercial uses/districts to residential uses. The goals and objectives of the C-1 district are:
C-2, Community Retail Commercial
The C-2 district is intended to provide suitable areas for the provision of retail and personal services for the community at large. The regulations which apply within this district are designed to encourage the formation of compatible and economically healthy business and service uses which benefit from close proximity to each other.
OP, Office Professional
The OP district is intended to provide suitable areas for non-retail commercial uses such as offices and financial institutions, schools, and clinics. This district is designed to support mid- sized office developments, banking and professional offices, and other lower intensity, non-retail commercial activities.
LI, Light Industrial
The LI district is intended to provide suitable areas for business distribution/service facilities, transportation terminals and manufacturing/assembly processes which do not emit noise, vibration, smoke, gas, fumes, odors or any other effluents from an enclosed building. These districts should have access to arterial roadways and utilities and discourage uses that are incompatible with light manufacturing. When located on the perimeter of an industrial node, the LI district should provide for uses that are low in intensity and scale to ensure compatibility with adjacent properties.
HI, Heavy Industrial
The HI district is intended to provide suitable areas for major manufacturing processing, warehousing and research facilities which require open storage and large amounts of land. Typical heavy industrial uses include manufacturing, chemical manufacturing and storage, petrochemical refining and storage, mining and other land uses that may affect the environment. These districts should have access to major streets and utilities and discourage uses which are incompatible.
When located on the perimeter of an industrial node, the HI district should provide for uses that are lower in intensity and scale to ensure compatibility with adjacent properties.